|
Features
The Ring Frame Construction
Extremely rigid frame
ensures virtually zero angular deflection on load ; the only
assurance of unsurpassable tool life for the production of high
quality pressing that
you will ever need. Permits
three side accessibility for versatile use of tool and fitment of
transfer mechanisms.
Now square bed and slide area
permits use of tool with larger forming area.It is designed to withstand
concentrated loads.
The
stroke Length
Upto 400mm stroke is available on demand.
The slide speed
10 mtr/minute for improved stamping quality for deep drawn
component. Yield rates are vastly improved when automated with roll
feed.
The slow draw speed reduces die impact, noise and
vibration which result in enhance die life and ensures precision
stampings.
It surpasses the hydraulic & double action press
on every count.
Lowest Overall
Clearance
On the HMX low Clearance is achieved by accurately machined
torque transmitting parts, particularly the joints, connecting
crank , connecting rod , ram screw and slide.
The Overall
clearance is less than half
of conventional presses which reduce breakthrough and other stresses
associated with punching.
At this
result in:
 |
Substantially
prolonged die life.
|
|
Noise
level is reduced to a minimum.
|
|
High
accuracy of point and torque-transmitting portions are easily
maintained improving the
durability of the press.
|
|
The torcmatic drive
The pressmaster trocmatic drive is a modular constructed double reduction
interchangeable speed reducer , transmitting high torque throughout the
kinematic chain.
It
delivers rated press tonnage at higher point above BDC enabling
thicker blanking and heavy forming operations .
The
precision engineered drive results in low operating noise and
vibration.
Forced
feed lubrication to all gears in the drive, ensures long life and
enhances durability of the press.
Press and operator Safety
A hydraulic
overload device is standard. The overload
device responds instantaneously and positively to overload condition to
return oil pressure to zero.
Should the press get jammed and stick at BDC, the oil pressure can be
manually released to remove jam.
Ratrofitable
Auxillary Drives
Provision is built for retro fitting output shaft to power
feeding & other devices.
|
